A complete kit replacing OEM windscreen support and allowing the mounting of heavy-weight navigation devices, such as Garmin 276cx and our CI Pad at the windscreen.
Compatible with KTM and aftermarket windscreens.
Does not allow for on-the-fly windscreen height adjustment, but there are 3 positions to choose from. Changing screen height requires partial disassembly.
Slightly changed angle of the windscreen noticeably reducing buffeting behind small “R” screen.
Adds only about 200gr to “R” windscreen. Whole solution is lighter than e.g. Puig large windscreen alone (i.e. no worries about adding too much weight on your bike).
WARNING: it is not designed for hard enduro kind of stuff. The tower alone could take it, but the plastic front on SA/R is not strong enough and you will get a lot of wobble with the risk of breaking the plastics on your bike. When you add the dashboard relocation kit, the solution is, however, quite sufficient for dirt and fire roads (tested in much rougher conditions;-).
For off-the-paved-road use we strongly recommend to add the dashboard relocation kit, which also stabilizes the whole tower.
There will always be a little wobble in the tower, which is O.K., if it stays withing reasonable boundaries. It is caused by the tower being mounted in the plastic front of the bike which moves on its own (it being plastic:-)).
On the photos there is also the dashboard relocation kit (can be added as an optional extra).
Until we manage to make written installation manual, please look at the installation video. (if you are not comfortable with figuring out how to mount it on your bike without a written manual, please wait with your purchase)